# Something strange error report

**URL:** <https://allpix-squared-forum.web.cern.ch/t/something-strange-error-report/236>\
**Category:** Uncategorized\
**Created:** [December 15, 2021, 4:36pm UTC](https://allpix-squared-forum.web.cern.ch/t/something-strange-error-report/236 "2021-12-15T16:36:41Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bail](https://allpix-squared-forum.web.cern.ch/letter_avatar_proxy/v4/letter/b/e0b2c6/32.png) [@Bail](https://allpix-squared-forum.web.cern.ch/u/Bail)\
**Post date:** [December 15, 2021, 4:36pm UTC](https://allpix-squared-forum.web.cern.ch/t/something-strange-error-report/236/1 "2021-12-15T16:36:41Z")

</div>

Dear Allpix Squared developers,

Normally everything is fine with AllPix Squared, and without any modifications, sometimes the following two problems are suddenly encountered.

1. After running… /bin/allpix -c xxx.conf, the following error is displayed  
can not load library /cvmfs/sft.cern.ch/lcg/views/LCG\_101/x86\_64-centos7-clang12-opt/lib/ibRio.so undefined symbol:\_ZNK6TClass14NewObjo
2. After source etc/scripts/setup\_lxplus.sh, the following error is reported  
Detected CentOS Linux 7  
Compiler type set to LLVM, version clang12.  
-bash: /cvmfs/sft.cern.ch/lcg/views/LCG\_99/x86\_64-centos7-clang12-opt/setup.sh: No such file or directory  
yes

Regards,  
Bail

---

<div class="post-metadata">

**Author:** ![simonspa](https://allpix-squared-forum.web.cern.ch/user_avatar/allpix-squared-forum.web.cern.ch/simonspa/32/597_2.png) [@simonspa](https://allpix-squared-forum.web.cern.ch/u/simonspa)\
**Post date:** [December 16, 2021, 6:04am UTC](https://allpix-squared-forum.web.cern.ch/t/something-strange-error-report/236/2 "2021-12-16T06:04:04Z")

</div>

Dear @Bail

both could be connected with (temporary) issues connecting to CVMFS. However, it’s interesting that in one case, LCG\_101 is loaded while in the other there is a reference to LCG\_99.

May I ask which version of Allpix Squared you are using (`allpix --version`) and how you installed it?

Best regards,  
Simon

---

<div class="post-metadata">

**Author:** ![Bail](https://allpix-squared-forum.web.cern.ch/letter_avatar_proxy/v4/letter/b/e0b2c6/32.png) [@Bail](https://allpix-squared-forum.web.cern.ch/u/Bail)\
**Post date:** [December 16, 2021, 9:18am UTC](https://allpix-squared-forum.web.cern.ch/t/something-strange-error-report/236/3 "2021-12-16T09:18:03Z")

</div>

Dear simonspa

First,allpix --version  
source /cvmfs/clicdp.cern.ch/software/allpix-squared/1.6.1/x86\_64-centos7-gcc10-opt/setup.sh  
allpix --version  
Allpix Squared version v1.6.1  
built on 2021-01-28, 17:30:48 UTC  
Second, Install steps:  
1.source /cvmfs/clicdp.cern.ch/software/allpix-squared/1.6.1/x86\_64-centos7-gcc10-opt/setup.sh  
2. git clone [Cern Authentication](https://gitlab.cern.ch/allpix-squared/allpix-scd) allpix-squaredquared.git allpix-squared  
3.cd allpix-squared  
4.mkidr build  
5.cd build  
6.cmake …  
7.make -j4 install  
8.source etc/scripts/setup\_lxplus.sh  
Run simulations!  
Are there any problems with the above steps?

Best regards,  
Bail

---

<div class="post-metadata">

**Author:** ![simonspa](https://allpix-squared-forum.web.cern.ch/user_avatar/allpix-squared-forum.web.cern.ch/simonspa/32/597_2.png) [@simonspa](https://allpix-squared-forum.web.cern.ch/u/simonspa)\
**Post date:** [December 16, 2021, 10:33am UTC](https://allpix-squared-forum.web.cern.ch/t/something-strange-error-report/236/4 "2021-12-16T10:33:45Z")

</div>

Hi @Bail

your procedure is a bit mixed up because you in fact have two versions of Allpix Squared flying around, and that’s probably causing the issue:

### From CVMFS

If you don’t need to change the code of Allpix SQuared for your application, you can use the pre-installed version from CVMFS. That’s what you do with

```bash
source /cvmfs/clicdp.cern.ch/software/allpix-squared/1.6.1/x86_64-centos7-gcc10-opt/setup.sh

```

Now you have a ready-to-use Allpix Squared iunstallation and can directly run `allpix -c ...` without anything else.

On a side note, the version you are sourcing is relatively old, I would recommend you to move to v2.1:

```bash
source /cvmfs/clicdp.cern.ch/software/allpix-squared/2.1.0/x86_64-centos7-gcc11-opt/setup.sh

```

### Your own installation

The second part of your commands are basically the installation of your own version of Allpix Squared - in that case you used the very latest `master` version which is in active development. For simulations this is not recommended. So if you really need your own version to tinker with, I would recommend the following recipe:

```bash
git clone https://gitlab.cern.ch/allpix-squared/allpix-squared.git
cd allpix-squared
git checkout v2.1.0
source etc/scripts/setup_lxplus.sh
mkdir build && cd build
cmake ..
make install -j4

```

But mixing the two options will mix the dependencies - the Allpix Squared v1.6.1 has been built with different dependencies than the `master` development version you are then compiling.

I hope this helps,  
Simon

---

<div class="post-metadata">

**Author:** ![Bail](https://allpix-squared-forum.web.cern.ch/letter_avatar_proxy/v4/letter/b/e0b2c6/32.png) [@Bail](https://allpix-squared-forum.web.cern.ch/u/Bail)\
**Post date:** [December 16, 2021, 3:01pm UTC](https://allpix-squared-forum.web.cern.ch/t/something-strange-error-report/236/5 "2021-12-16T15:01:26Z")

</div>

Hi simonspa

I followed you steps,but have a question  
when I source etc/scripts/setup\_lxplus.sh  
-bash: /cvmfs/sft.cern.ch/lcg/views/LCG\_99/x86\_64-centos7-clang12-opt/setup.sh: No such file or directory  
yes

Best regards,  
Bail

---

<div class="post-metadata">

**Author:** ![simonspa](https://allpix-squared-forum.web.cern.ch/user_avatar/allpix-squared-forum.web.cern.ch/simonspa/32/597_2.png) [@simonspa](https://allpix-squared-forum.web.cern.ch/u/simonspa)\
**Post date:** [December 16, 2021, 3:05pm UTC](https://allpix-squared-forum.web.cern.ch/t/something-strange-error-report/236/6 "2021-12-16T15:05:54Z")

</div>

Hi @Bail

sorry for the confusion - but could you once more say which exact steps you did now?

/Simon

---

<div class="post-metadata">

**Author:** ![Bail](https://allpix-squared-forum.web.cern.ch/letter_avatar_proxy/v4/letter/b/e0b2c6/32.png) [@Bail](https://allpix-squared-forum.web.cern.ch/u/Bail)\
**Post date:** [December 20, 2021, 7:37am UTC](https://allpix-squared-forum.web.cern.ch/t/something-strange-error-report/236/7 "2021-12-20T07:37:20Z")

</div>

Hi simonspa

I may have found the problem, when make install -j4, it says Disk quota exceeded.  
Maybe I can download the previous version instead of the latest one.  
Do you have any recommendations for a historical version? How do I download it?

Best regards,  
Bail

---

<div class="post-metadata">

**Author:** ![simonspa](https://allpix-squared-forum.web.cern.ch/user_avatar/allpix-squared-forum.web.cern.ch/simonspa/32/597_2.png) [@simonspa](https://allpix-squared-forum.web.cern.ch/u/simonspa)\
**Post date:** [December 21, 2021, 6:53am UTC](https://allpix-squared-forum.web.cern.ch/t/something-strange-error-report/236/8 "2021-12-21T06:53:52Z")

</div>

Dear @Bail

as stated above - if you are working on a machine that has CVMFS **there is no need to download anything at all**. Please just call the one single `source` command to load everything you need from CVMFS. No `cmake`, no `make`.

The disk space will however still be a problem because CVMFS caches files on your local disk and this can be several GB. Allpix Squared itself is only a couple of 10MB.

Best,  
Simon

---

<div class="post-metadata">

**Author:** ![Bail](https://allpix-squared-forum.web.cern.ch/letter_avatar_proxy/v4/letter/b/e0b2c6/32.png) [@Bail](https://allpix-squared-forum.web.cern.ch/u/Bail)\
**Post date:** [December 21, 2021, 8:34am UTC](https://allpix-squared-forum.web.cern.ch/t/something-strange-error-report/236/9 "2021-12-21T08:34:43Z")

</div>

Dear simonspa

Thanks for your reply,I need to change the code so I need my own installation.I didn’t have problems with disk space when I installed versions 1.3 and 1.6.1 before, could it be because of the latest version? May I still install the previous versions?  
And can Allpix Squared analogue the silicon microstrip detectors?

Regards,  
Bail

---

<div class="post-metadata">

**Author:** ![simonspa](https://allpix-squared-forum.web.cern.ch/user_avatar/allpix-squared-forum.web.cern.ch/simonspa/32/597_2.png) [@simonspa](https://allpix-squared-forum.web.cern.ch/u/simonspa)\
**Post date:** [December 21, 2021, 8:54am UTC](https://allpix-squared-forum.web.cern.ch/t/something-strange-error-report/236/10 "2021-12-21T08:54:20Z")

</div>

Hi,

your disk space has nothing to do with Allpix Squared. The full repository is 10MB (!).

Yes, of course you can compile previous versions, either by downloading the respective tag or by cloning the git repository and checking out the tag. However, I strongly recommend staying up-to-date and instead to clear up some disk space (`du -hs ~/*` might help…)

/Simon
